Check out this *secret* site where it’ll show you a cool trick that actually TRIPLES your PC’s performance… Plus tons more!
The Ultimate CPU Overclocking Guide!
This is the Second of 2 Basic Videos in the series of how to overclock an ASUS Socket 775Core Two Generations of CPUs. More info & videos to come!
Incoming search terms for the article:
- asus p5sd
- q9550 Asus P5Q SE overclocking
- p5q se plus overclock
- Overclocking cpu Q6600 on asus p5q se plus
- asus p5q se overclocking
- asus p5q turbo overclock -pro
- overclocking socket 775 asus q9550
- p5q se plus overclock guide
- p5q se pll voltage
- overclok asus p5q intel 7500
- settings q9550 asus p5q se
- overclocking q6600 on p5q se plus
- overclocking cpu intel 775 socket
- overclocking asus p5sd vm
- p5q se plus q9550 overclocking
- p5q se quad overclock
- p5q se vdroop
- setfsb pll asus p5sd
- q9550 p5q-vm overclock
- q9550 overclocking with asus p5qse
i cant oc mine coz of my options are locked
i have asus p5sd-vm
1gb 333mhz ram
intel dual core 1.8 ghz
why do i get this error when i try to oveclock my q9550 on asus p5q turbo (FATAL ERROR: Rounding was 0.498046875, expected less than 0.4
Hardware failure detected, consult stress.txt file.) i get this error on core1 and core2. Pls help. Ty
Sir what is the recommended settings for my rig?
ASUS P5Q SE PLUS up to 1600FSB
4gig DDr2 800 mhz
Core 2QUAD Q8400
I am a noob so any help would be very much appreciated. thanks!!!
hehe btw how did u record with such great fps in
Crysis Wars Aztec from CSS HD!
WOW! Thats awsome – make sure to run occt for at least 20 minutes to make sure things are stable & such.
Thanks again, and stay tuned – I have a lot more great tech videos on the way!
i have 4ghz now 1.360 with the 8 multipier and 500fsb wich i would never have thought of setting it to before untill i saw this vid
temps are 10 celcius lower then on 450fsb/9.5 multiplier 4275mhz
thx
yea – 1.425 is usually what the "wolfdale" 45nm cpus need for stable OC above 4 ghz – some need more – some less. Thanks for your comments and please dont forget to rate my videos – thanks for watching!
my e8500 needs more then 1.4 for 4ghz +
you may not have Load-Line Calibration available on your system, or it may be called something else, EVGA calls it the Vdrop control.
Do you have a load – line calibration option on your system? I cant find in on my compter…
Load Line calibration is the tool you use to combat vdrop – the motherboard will adjust and rise the voltage if it detects the voltage dropping. This stabalizes the voltage and helps in overclocking
ya, but if you have a bad VDROP (not vdroop) whats the point of using loadline calibration