Check out this *secret* site where it’ll show you a cool trick that actually TRIPLES your PC’s performance… Plus tons more!
The Ultimate CPU Overclocking Guide!
Intel Pentium Dual Core E5200 @ 4353MHz PDP 1GB DDR2 PC4300 (533MHz) @ 726MHz ASUS P5B Intel *STOCK COOLING* Thermaltake 80m”m Smart Fan 2 Nidec 120m”m fan
Incoming search terms for the article:
- e5800 overclock
- intel e5800 overclock
- intel pentium e5800 overclock
- overclock e5800
- e5200 unlock
- unlock e5200
- clockgen e5200
- intel e5200 unlock
- overclock intel e5800
- e5800 overclocking
- intel pentium e5200 pll
- how to unlock intel dual core
- intel e5800 overclocking
- intel dual core unlock
- unlock intel dual core
- dual core e5800 overclock
- intel dual core unlocker
- intel e5200 overclocking guide
- pentium m 750 pll
- how to overclock intel dual core e5800
You’re gonna get ear damage from the noise, lol
Youäre gonna get ear damage from the noise lol
@EJ123EJStar That’s the reason why people buy better cooling……
DANGERS WHEN YOU OVERCLOCK A CPU
1.CPUs have rated and maximum speeds. Exceeding the maximum speed is far more likely to cause problems than more conservative adjustments.
2.Expect a shorter life for an overclocked processor, including the possibility of its immediate failure.
@newbodymind but Dude i have 750 Dothan one thing i tell yu that i downloaded CPUZ and ran it i am getting 799MHZ but actuall i have 1.86Ghz and i tried yur clokgenerator PLL whenever i tried move slider it resets to default Help me nothing happens i will be very thankfull if u help me no one i s helping me out
@razanet16 hey i have the same chipset try clockgen with PLL ICS 954123 this one works on all boards usually and is the one i`m using now with my toshiba tecra
s2 with dotham pentium m 770 at 2.4 ghz after a small oc go slowly no more than 25 mhz at a time if you are not experienced and test your oc before going further
incredible but you`ve got to run super pi longer than this to find problems 8m at the least but much credit goes to you and that magnificent chip the voltages arfe finre
as long as the chipset volts are not to high ang fsb voltages are within limits i have a
e5200 now at 3.750 ghz and 1.49 vcore with 1.3 fsb rock stable had e2160 before that a3.6 ghz with 1.6 vcore and 1.3 fsb that chip loved voltage and was rock stable loved it this chip i have now really can`t take anything over1.5volts
how u did that? i have E5300 and i play at 3.04GHz with 2.3 or something Vcore voltage.
system starts crashing at 3.33GHz or more.
help.
Hi, I have in my pc (Vrey noob computer) 1 GB RAM memory, and 2.40 GHz Intel celeron. I want to overclock my processor to 2.80 or 3.0 GHz. How to do it? Can anybody help me? Thanks..
Impressive ,Especially on that Slow Ram…Stick some 1066 Ram in there…I had 3- e5200′s , Only one Could I get over 4ghz…
get down their is an AIRSTRIKE!!!…
I Have Pentium M 750 Dothan 1.86Ghz 533Fsb i915pm chipset
Can anyone tell me how can i overclock it to 2.13Ghz I didnt try Clockgen but i dont know my Fsb Type like Ics915 or something can any one guide me i will be very thankfull if any help me out
How did you do it show us some steps, I have a dual core E5400, and all I can get is 3.5ghz! help me out
sound like you parked a motorcycle in your living room, rofl
how did you do this?
get down air strike lol
can i upgrade my intel pentium to intel core
Good dam u better put some bricks on ur case b4 it take off…
i use this cpu i hit a bus wall on the chip at 340 but i can run it stable at 340 at 3.4ghz if i drop the fsb i can raise the clock rite up and run it at almost 4ghz with no heat problems what so ever and a minimal vlts increase . it has a 12x multiplier .these chips are a lott of funn and can eat the volts no problem if u wanted to push em up lotts . moving to a e8600 to play with next .you should always buy yesteryears tech. your exspensive new gear is soon outdated
Stock cooling, omg.
Jesus Christo!!!!!!
@HXLONEWOLF Never said you didn’t.
@shawn54753 um wow… i did spell pentium right,,,
I Have Same CPU
Intel Pentium Dual Core E5200 @2.50GHz =)